Star Christmas Plastic Bottle

Material : - Bottles of soda, - scissors , liquid glue , glue with glitter - Coffee capsules , wire or tape .

1. Remove the bottom of the bottle , with the orientation on the same circle marked .


Note that the bottom of the bottle there are spaces that are marked as shown in the photo below :


2 . Make a cut between spaces . In the colorless background there are five -six spaces on green background . Start by joining the ends inward , folding to form a triangle . Repeat the process until all form -pointed star .

3 . Knead the coffee capsule that will be the center of the star. Stick with liquid glue . Decorate with glitter glue star with the desired color.

4 . If you want to hang it , will have to make a small hole with a needle heated in the fire . Thread yarn or ribbon and hang anywhere.

TIP : Paint star with permanent ink pens or stained glass . Several stars glued a circle forming a wreath or an embellishment to the center of the table. You can replace the coffee capsule for silver paper balls , corks or bottle caps .

Estrela de Natal de garrafa pet

Material: - Garrafas de refrigerante, - Tesoura, cola líquida, cola com glitter, - Cápsulas de café, fio ou fita.

1. Remova o fundo da garrafa, tendo como orientação o círculo marcado na mesma.


Observe que no fundo da garrafa existem espaços, que estão assinalados como mostra a foto abaixo:


2. Faça um corte entre os espaços. No fundo incolor existem cinco espaços e seis no fundo verde. Comece por unir as pontas para dentro, dobrando de modo a formar um triângulo. Repita o processo até formar todas as pontas da estrela.

3. Amasse a cápsula de café que será o centro da estrela. Cole com cola líquida. Decore a estrela com cola com glitter na cor desejada.

4. Se pretender pendurá-la, terá que fazer um pequeno furo com uma agulha aquecida no fogo. Passe um fio ou fita e pendure onde quiser.

DICA: Pinte a estrela com canetas permanentes ou tinta vitral. Várias estrelas coladas num círculo formam uma coroa ou um enfeite para o centro da mesa. Pode substituir a cápsula de café por bolinhas de papel prata, rolhas de cortiça ou tampas de garrafas.

CHRISTMAS TREE

1. Grab a clean and well washed , preferably in green plastic bottle . Then, with the scissors cutting the bottom of the bottle according to the checkmark exists in the bottle to facilitate a perfect cut.





2. Cut the bottle into strips about 1.5 cm wide by the end of the bottleneck of the bottle. After arrendonde tips with the help of scissors cut each strip.




3.Carefully use a candle. The secret of the tree is the effect it will produce passing each strip in the sail . CAUTION : Hold good, as it passes the candle for her not crease too ( otherwise it will shrink more than necessary ) . Give a space of about 2.00 cm every last candle ( making a move to up and down with quick movements , like a back and forth ) to a dark tone appear in strips cut from plastic bottles.




4.After doing this process, the size of your Christmas tree will depend on the amount of bottles used, hence the more bottles using higher your Christmas tree.

Árvore de Natal com garrafas pet

1. Pegue uma garrafa pet lavada e bem limpa de preferência na cor verde. Em seguida, com a tesoura corte o fundo da garrafa seguindo a marquinha que existe na própria garrafa para facilitar um corte perfeito.                     

2. Corte a garrafa em tiras com aproximadamente 1,5cm de largura até o fim do gargalho da garrafa. Depois arredonde as pontas com o auxílio da tesoura cada tirinha cortada.

          

         
3. Com cuidado utilize uma vela. O segredo da árvore está no efeito que ela vai produzir passando cada tirinha na vela. ATENÇÃO: segure bem, a medida que vai passando na vela para ela não enrrugar muito (do contrário ela irá encolher, além do necessário). Dê um espaço aproximadamente de 2,00cm a cada passada de vela (fazendo um movimento para cima e para baixo com movimentos rápidos, como se fosse um vai e vem) até aparecer um tom escuro nas tirinhas cortadas da garrafa pet.
         

         

Depois de feito esse processo, o tamanho da sua Árvore de Natal vai depender da quantidade de garrafas utilizadas, consequentemente quanto mais garrafas utilizar maior será sua árvore.

        

How to make a wreath for use on the hair!!!!!!!!!

Materials Needed:

1. pliers
2. scissors
3. Green plastic wire
4. Green tape
5. Barbed wire 20 (found in stores of building materials)
6. Many flowers and leaves. Here I used natural flowers, but you can also use artificial flowers, plastic or fabric

Step 1 - The Crown

With the pliers, cut a piece of barbed wire 20 and make a hoop the size of your head. Tough to get well, do the rim with two laps. Secure the tip by twisting the tip of the wire with the pliers and encape all around with green tape.

Step 2 - Flowers       



Cut flowers and leaves leaving a piece of the stem and put them together into small cliques. Wrap tightly with a piece of green plastic wire. (This wire is much like those found in packs of bread and flexible. Attaching the flowers just cheer snuggly)

Mix leaves and flowers of different shapes and colors in each clique. This will leave his crown much more cheerful!

Step 3 - Placing flowers on the crown



Now just hold the little groups of flowers right next to each other on the ring that you prepared in step 1, always giving several laps and apertadinhas green plastic wire up to walk around the entire crown.

Now, if you want a more discreet accessory, bet on staples!

Attach one of the cliques of flowers from step 2 in a hairpin. It is simple and cute!

How to make a ceramic decorated for errands!!!!!!!

Having a whiteboard (these chalk even!) In the room is very cool. You can write things, draw or ask your friends leave cute messages when you are vistar: is stylish and fun! Let the piece even more amazing opting for a different format or a particular painting. Want to learn? It is very simple:
What you will need:
01? An oval frame, the size you prefer.

02? Matte black enamel paint, found at any hardware store for construction.

03? White craft paint

04? White glue

05? A disposable plastic pot

06? A roll of foam for painting

07? Fine sandpaper to wood

08? Stencil to paint the design you choose (found at craft stores)

09? Brushes

How do?

1. Prepare all



Before you start, line the space you will use with newspaper. So your mom will not find anything bad if you mess with paint!
Then sand the frame and the bottom of the slate with fine sandpaper. Pass a dry washcloth to dust.

2. Painting the whiteboard
Okay, now let's begin.

Put a bit of enamel paint in matte black plastic pot (like the ink is permanent, it is important that the pot is disposable). Spread the paint and roll the bottom of the frame. Allow to dry and repeat. It's nice to at least two coats of paint to look good black

This ink takes a while to dry, but if you're anxious, accelerate the process with a hair dryer! Another tip is to paint both the front and the back of the bottom of the frame, to the finish look better.

3. Painting the frame



With the white paint and brush, paint the entire frame of the slate. Allow to dry and repeat. If you find you have not got good white, apply a third.

After the white paint dries, place the stencil and fill in the designs with black ink. Go doing this until you complete all around.
After sequinho okay, turn the frame upside down and apply white glue on the edge that holds the bottom and paste, now painted black.

5. There you go!



Now just write? or ask them to write? cool things using chalk school. And when you get bored, just erase and write again.

Warning: the ideal is to wait at least a week for the black ink dry completely before starting to write and erase the chalk!

How do cape studded rocker Mobile!!!!!!

If you have a rocker style and want to let your phone more fashion, run to make a cape tacks!

What you will need:



Tacks (or spikes), found in dry goods stores;
A piece of cardboard;
A pencil;
A cape smooth silicone cell;
scissors;
Spatula, dull knife or clippers.
Step 1: With the pencil, make little marks where you want to apply the tacks. Be creative! You can place them in rows, or can mount designs like heart or skull, for example.
Step 2: Place the pushpin on the mark you made with the pencil and tighten until the teeth pass through to the other side.

Step 3: With the spatula (can be a knife or pliers) tighten the teeth of tack inside to fix it.



Step 4: Go putting thumbtacks on all the markings, repentido steps 2 and 3.



Step 5: Cut a piece of cardboard in the shape of the inside of the dust cap (if your phone has camera, remember to make a cut in the space of the lens).

Step 6: Put that piece of cardboard cut from the inside of the dust cap before? Wear? your phone. So you avoid the tacks scratching the device;)

Ready! Your mobile has won another guy!